Pompano Beach runs from the Intracoastal to the western canals, and the older coastal homes near the water take the hardest weather in Broward. When Hurricane Wilma came through in October 2005, roofs in Pompano Beach were among the worst hit in the county. Many of those homes got patched roofs but never got the attic checked after the water came in.
Inland neighborhoods like Cresthaven and Kendall Green have their own version of the problem. Older slab homes with the air handler in a closet or garage collect condensation all summer. Add the April 2023 storm that dumped close to 26 inches of rain on Fort Lauderdale and heavy rain across the rest of Broward, and plenty of Pompano garages and low rooms stayed wet for days.
If you own a home in Pompano Beach, this site puts you on the phone with an independent local mold provider. That provider does the inspection and the work. This site does neither.
Water-stained drywall from a roof or window leak is the usual reason for mold removal, and the wet insulation behind it comes out at the same time. Owners of older homes with the ductwork above the ceiling ask about attic mold remediation after a storm. And because so much of the older housing here changes hands, post-remediation verification gets requested to close out a repair before the listing goes up.
The city's Building Inspections Division at 100 West Atlantic Boulevard uses a single permit that covers the plumbing, electrical, roofing, and drywall trades on one job. That helps when a mold repair turns into a rebuild with more than one contractor.
Pompano Beach runs its own Utilities Department for water, sewer, and stormwater, and it also serves parts of Lighthouse Point and Lauderdale-by-the-Sea. A meter that keeps turning with every tap off is worth a call to them before the provider arrives.
Call (000) 000-0000 to be connected with a local mold provider serving Pompano Beach.
A visual inspection with moisture readings to find the source, the extent, and whether testing is needed.
Containment, negative air, HEPA filtration, and removal of affected drywall, trim, and insulation, then cleaning and drying.
Air and surface samples sent to a lab, done by a licensed Florida mold assessor separate from the remediator.
Air handler, coil, and duct cleaning when the smell shows up every time the air conditioning runs.
Roof-deck and truss mold from roof leaks, blocked soffits, or ducts sweating in a hot attic.
Mold in drywall, ceilings, grout, and behind vanities from steam and slow leaks, the most common first call.
Clearance testing after the work by a separate assessor, so you have paperwork for a sale, a tenant, or an insurer.
Heavier dark growth handled with full containment and protective gear. Color does not identify the species, and the process does not change.